I worked on the treadle desk for a week or two before working on the sewing machine. So I turned the machine to the underside and got busy. I took a soft painters brush and cleaned out the heavy bits of dust first but a lot was still stuck because it was plastered in sewing machine oil but I did my best.
Next, up I slathered it in Gojo and let it sit for a while, then started the process of wiping it off, reapplying and repeat, repeat and repeat it again. I used a lot of shop towels, Q-tips and scotch brite pads. Below is some before and after pictures of the underside.
Before
After
Here's a close up.
Before
And as good as the 'after' pictures are, the parts are still a bit dirty and I will continue the cleaning process with dental picks to get in the really tiny areas.
Comments
Post a Comment